Type1 EV Car Charger SAE J1772 16A Plug
Product Introduction
This plug and matching socket are designed for use in EV charging cables and will mate with any J1772 specified socket/plug.
The type 1 plug is a variant from the Asian and American area. It was developed there. There is mostly a 1 phase network. Thus the plug allows only 1 phase charging. The type 1 plug can be either with 3.7 kW power and 16 A charging current integrated in the charging cable or with 7.4 kW charging power and 32 A charging current on the phase. Since the charging power is limited here, the type 1 plug will disappear more and more from the European area, because one has a 3-phase network in Europe. With the 1-phase charging with the type 1 plug a phase-shift occurs in the European network and therefore the type 2 was fixed as standard. More and more electric cars now have type 2 instead of type 1 plug.
Product Features
1.Meet SAE J1772-2010 standard
2. Rated current：16Amp 32Amp
3. Operation voltage: 250V/415V
4.Service life:>50,000 times
5.Insulation resistance: > 1000MΩ
6.Terminal temperature rise: <50K
7.Contact impedance: 0.5m Ω Max
8.Vibration resistance: Meet JDQ 53.3 requirements
9.Working temperature: -30°C ~+ 50°C
10.Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
11.Contact Pin: Copper alloy, silver or nickel plating
12.Sealing gasket: rubber or silicon rubber
Specification
| Physical Properties | ||||
| Conductor | Conductor Size/ | EV07EE-H 3G2.5+2X0.5mm2 | ||
| Construction Item | 2.5mm2 | 0.5mm2 | ||
| Construction | mm | 140/0.15±0.008 | 28/0.15±0.008 | |
| Material | — | Bare Copper Wire | ||
| O.D | mm | 2.40 | 0.91 | |
| Insulation | Material/ | mm | TPE | |
| Avg.Thickness | mm | 0.90 | 0.60 | |
| Min.Thickness | mm | 0.71 | 0.45 | |
| Insulation O.D | — | 4.2±0.15mm | 2.2±0.15mm | |
| Color | Brown, Blue, Yellow/Green | Black,Green | ||
| Coverage | % | Non-woven fabric,100% Coverage wit!, 25% Overlapping | ||
| Jacket | Material | — | TPE | |
| Avg.Thickness | mm | 1.70 | ||
| Min.Thick | mm | 1.50 | ||
| Cable O.D | mm | 12.2±0.2mm | ||
| Color | — | Orange or Black | ||
| Marking | TüV 2 PfG 1908 EV07EE-H 3G2.5mm2+2×0.5mm2 450V/750V EV Cable | |||
| Electric Characters | ||||
| Reference Standard | V | TüV 2 PfG 1908/05.12 | ||
| Rated Voltage | V | AC 450/750V | ||
| Temperature Rating | ℃ | -40℃ ~ +125℃ | ||
| Max.Conductor Resistance at 20℃ | Ω/KM | 2.5mm2 ≤7.98 Ω/KM & 0.5mm2 ≤39.0 Ω/KM Max at 20℃ | ||
| Reference Curren | A | 16A | ||
| Cold Bend Test | — | ‘-40±2′C x 4H No Breakdown | ||
| Tensile Strength | N/mm2 | Insulation≥10N/mm2 ,Sheath≥10N/mm2 | ||
| Flame test | — | IEC 60332-1 | ||
| Heat ,Cold,Wear,UV Resistance,Waterproof and Higher the mechanical strength | ||||
TAGS
J1772 Plug
Ev Connector
Charging Connector
Electric Vehicle Plug
Ev Charger Connector
Ev Charging Connector
J1772 Connector
electric car plugs
