16A American SAE J1772 type 1 EV charging cable connector
Product Introduction
The charging speed depends on three components - the charging station, which is the source of power, the charging cable and the on-board charger. You should select right EV charging connector to fit this system. Type 1 is a single-phase plug and is standard for EVs from America and Asia (Japan & Korea). It allows you to charge your car at a speed of up to 7.4 kW, depending on the charging power of your car and grid capability. This plug is designed for use in EV charging cables and will mate with any J1772 specified socket. It’s rated at 70A and therefore are suitable for 16 and 32 amp or higher current applications as per the IEC 61851-2001 / SAE J1772-2001 standard. Shell colors are black, white, or customized.
Product Features
1.Meet SAE J1772-2010 standard
2. Rated current：16Amp 32Amp
3. Operation voltage: 250V/415V
4.Service life:>50,000 times
5.Insulation resistance: > 1000MΩ
6.Terminal temperature rise: <50K
7.Contact impedance: 0.5m Ω Max
8.Vibration resistance: Meet JDQ 53.3 requirements
9.Working temperature: -30°C ~+ 50°C
10.Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO)
11.Contact Pin: Copper alloy, silver or nickel plating
12.Sealing gasket: rubber or silicon rubber
Specification
16A with 1 phase = max. 3.7kW
20A with 1 phase = max. 4.6 kW
32A with 1 phase = max. 7.4kW
16A with 3 phases = max. 11kW
32A with 3 phases = max. 22kW
TAGS
J1772 Plug
Type 1 Plug
ev plugs
Type 1 Connector
ev charger plug
EV Charging plug
Ev Charger plug J1772
Charging Connector
